Product Description
HP CLEANER – is an evaporator coil cleaner that quickly dissolves built-up dirt, grease, nicotine, lint and more. Meets USDA standards. Recommended for evaporator coils. When used on condenser coils and electronic air filters, rinsing is recommended.
HP CLEANER is an evaporator coil cleaner that quickly dissolves built-up dirt, grease, nicotine, lint, and more. Meets USDA standards. Recommended for evaporator coils. When used on condenser coils and electronic air filters, rinsing is recommended. Dilute with 3 to 6 parts water, depending on the application. Also available in a super-concentrated quart that can ship without hazmat fees! VOC content is zero.
Features and Benefits
- Heavy Duty
- Non-Acid
- Penetrates Deep
- Dissolves Grease, Lint, Dirt, and Nicotine
HP Cleaner Directions:
Wear gloves and eye protection.
- Turn the system off.
- Mix 1 part HP Cleaner with 3 to 6 parts water.
- Spray directly on the coil, make sure to thoroughly saturate the coil.
- Allow the solution to sit for 5 minutes.
- Resume normal operations.
Evaporator Coils: Apply to the air intake side of the coil. If possible, the fan should be operating. No rinsing needed.
Condenser Coils: Rinse thoroughly after applying.
Electronic Air Filters: Turn off unit and fan. Be sure to wet all areas of the plate. Rinsing is recommended. Keep from freezing.
DANGERS & PRECAUTIONS
Read and understand the product’s label and Safety Data Sheet. Do not breathe mists. Wash hands/gloves thoroughly after handling. Wear protective gloves, eye protection, and protective clothing. Provide adequate ventilation to keep the vapor concentration below TLV.
Equivalent Part Numbers: 6607, 6607-41GS, 660741GS, HP1
