Product Description
HIGH TECH ACID – is one of the few remaining hydrofluoric acid coil cleaners on the market. If used responsibly with proper safety precautions, it is a hard coil cleaner to match in effectiveness. It foams heavily and leaves coils bright-looking, almost factory new. Rinsing is always required on condensers and instructions should be followed.
HIGH TECH ACID is a low cost, high-performance acid-based condenser coil cleaner. It rivals the competitor’s high-end products in performance. The formula works hard to dissolve dirt and grime while it removes scale and oxides. The product’s foaming action leaves coils shiny, appearing like new. One gallon makes 4 gallons of ready to use coil cleaner. Rinsing is required. VOC content is zero.
Features and Benefits
- Heavy Foaming
- Cleaner and Brightener
- Professional Strength
- Tackles Scale and Oxides
Directions:
Refer to the Safety Data Sheet before using the product. Goggles, gloves, and other protective clothing should be worn when using this product.
- Turn the system off.
- Dilute 1 part High Tech Acid with 3 parts water.
- Add water to a low-pressure Vapco sprayer, then add the cleaner. The concentration of cleaning solution may be increased or decreased depending on job requirements.
- Spray directly on coil, thoroughly saturating the coil.
- Allow the solution to remain for 5 minutes
- Rinse thoroughly.
DANGERS & PRECAUTIONS:
Read and understand the product’s label and Safety Data Sheet. Do not breathe mists. Wash hands/gloves thoroughly after handling. Provide adequate ventilation to keep the vapor concentration below TLV. May be corrosive to metals. This product may remove anodizing. It may also etch windows or other glass surfaces and may affect galvanized or painted surfaces. Protect all such surfaces during application. In case of contact, rinse immediately. DO NOT use it in any manner for which it was not designed. Always wear chemical resistant gloves, safety glasses, and protective clothing when applying product. Do NOT handle or use this product until all safety precautions have been read and understood. Chlorine liberating material. Do not mix with bases, ammonia, or other cleaning compounds. Provide adequate ventilation to keep the vapor concentration below TLV.
Do not use on cooking utensils and do not transfer the contents of the bottle to another container.
Equivalent Part Numbers: 6604, 6604-41GS, 660441GS, HTAC1
